ASV HFE-80 Spindle


The HFE-80 Spindle is suitable for machining operations, such as drilling, milling, as well as for grinding. It can be operated in various positions, such as horizontal, vertical, or angular. The spindle is designed to run either clockwise or counterclockwise.

Its neat, compact design allows the spindle to be attached to many and various application on different machine, etc. With its design, flexibility, this spindle can be ganged together in groups, etc. Brackets to mount spindles are also available upon request.

The HFE-80 Spindle is operated from a high frequency inverter that can run the spindle at various speeds. The spindle is of a totally enclosed construction, with ABEC Class 7 bearings, and with the use of some ceramic bearings in critical applications as well.

Bearings are permanently lubricated with no additional lubrication required. The spindle is equipped with an air-purge port for front and rear bearing to keep out contaminants and coolant.

This spindle is cooled with a self-driven shaft-mounted fan.

Standard accessories supplied:
1 Spindle Collet Nut
1Collet (size to be determined)
2 Wrenches

Optional Accessories:
• High Frequency Inverter for 240 V input
• High Frequency Inverter for 480 V input
• Cable and connector
• Braking Resistor